Anti-seize

Threads galling generates high costs in industry. Galling when screwing is due to overheating of fixations when screwing is too fast. This phenomena reduces the productivity at time of installation, as well on assembly lines as on construction sites. furthermore, if the fastener is sized up, the operation of restoration is long and expensive. Galling when functioning is also a problem. The assembled parts become impossible to remove without destroying a part of the fasteners.
The anti-seize pre-coating solutions are imperative in the industry by their economic advantages and by their ease of use.

Galling phenomena is present in various situations :
Galling when screwing at time of installation of threaded part.
Cold welding corrosion under vibration constraints.
Rust in severe environment.

To prevent galling during assembly, we apply a dry film lubricant on the threads in order to reduce the coefficient of friction.
To get the anti-seize function, we use a dry and tack-free lubricant which prevents from galling under high temperature (up to 700°C) and under high pressure. The pre-coating allows the control of screwing (low coefficient of friction) and an easy disassembly.

Download the technical data sheet