Locking by bonding

Pre-coating is a technology developed about thirty years ago for automotive industry. During the ’80s, fasteners were secured by liquid adhesives but the deposit caused much troubles on the assembly lines. the pre-coat solution came forward because of its easy to use and its favorable economic result.
Today, pre-coating is used in any industry. Our special machinery enables to realize small series (1000 units) as well as much larger series (1 million units) for a wide range of applications : m1 to m20 screws, m5 to m30 nuts, axes, pins, connectors, plugs, inserts … special parts.

the assemblies unscrew because of the vibrations, shocks and thermic dilatations. numerous technologies have been developed in order to secure the screwed assemblies to avoid untimely unscrewing.

The most efficient solution against unscrewing
is to bond the threads by the pre-coat technology.

the technique consists in pre-coating the threads with a microencapsulated adhesive which
is activated only while screwing. Upon assembly, the adhesive components are released and creates a bond between the male and female threads. it is the most effective anti-unscrewing solution.

The pre-coated fasteners replace the common thread locking solutions thanks to utmost
technical performances ans economical advantages:

Excellent performances: excellent resistance against vibrations
Easy conception: replaces standard screws without a re-conception of the assembly
Rapid assembly: no need of a washer nor adhesive
Technical control: the deposed volume of the pre-coating product on the assembly is always the same
Excellent quality: no omission possible of the coating process
Important reduction of the assembly costs: high productivity in workshop and on constrution site
Suppression of the hygienic and security problems due to the fluid adhesives.